2 Part - Heat Activated Foil

PART 1 - SISER PS ADHESIVE HTV - 12inch x 7.5inch and 12inch x 1 metre

Siser PS Adhesive is just like the Siser PS range with an adhesive carrier side and a material side. Siser PS Adhesive has a pink protective layer, the pink layer must be removed before cutting.

The Carrier side is much smoother and shinier than the material side. The material side is just a layer of transparent glue, but not just any glue, Siser PS Adhesive.

This PS Adhesive can be used with any Heat Activate Foils. The cloudy appearance of the PS Adhesive turns clear when applied, and can be cut on any Vinyl cutter.  

PART 2 - HEAT ACTIVATED FOIL  - 6 inch x 5 metre

15 Foil Colours available in 6 inch x 5 metre rolls. Got a larger design? Don't worry - you can layer the foil to cover your design. 

Heat activated Foils can also be used with We R Memory Keepers Foil Quill and Go Press 'n' Foil Set ups *available at your local craft stores*

5 Easy Steps

1. Cut your P.S Adhesive
2. Weed your P.S Adhesive
3. Press your P.S Adhesive Design 135c for 5 Seconds and peel carrier sheet HOT!
4. Lay Foil colour side up and press 135c for 15 seconds (use teflon or baking paper to cover foil to protect the foil 
5. Wait till foil is COLD - Think Elsa in Frozen COLD! Then peel! 

Temperature: 135-150°C Pressure: Medium Pressure
Heat your garment for 2-3 seconds to ensure there are no wrinkles.

If some additional foil is left behind - Don't Stress! Just brush/scratch it off and it will just fall away.